April 22, 2017

What Should be used to Screw On Broadheads?

Screw On Broadheads thumbnail

What should be used to screw on broadheads? Well, this is a question with very few answers because there is no shortcut to tightly screwing your broadhead on the arrow shaft. Every seasoned hunter will confess to you that a tight arrowhead is critical when it comes to bringing down a big game.

I mean, there is no need of hitting that whitetail deer in the right spot only for the broadhead to fail to do the expected damage. That is the reason every hunter should be eager to know what should be used to screw on broadheads.

I have been in countless hunting expeditions, and I can confess that several of my friends have lost big trophies because their broadheads were not well fixed. In most of these cases, the broadheads were either poorly fixed, or the wrong material was used to connect them to the shaft. Today, I want to demystify what should be used to screw on broadheads. Read on…

So, What Should be used to Screw On Broadheads?


Hunting has been around for several thousands of years. Therefore, hunters have had a long period to discover and determine the best ways to screw on broadheads on arrow shafts. The most common and most efficient include the tie and the glue on method. 

Tying arrowheads has been around ever since human beings began walking on earth. It was the earliest way to screw on broadheads though it was not and is still not that efficient.

Broadheads are strongest when glued on the arrow shafts. However, gluing will also work for traditional arrow tips. Gluing comes with several benefits apart from being strong enough to hold the broadhead even when penetrating tough hides and skins. It is the most efficient way to fix a broadhead

There are two types of glues that can be used to fix broadheads on the screw on adapter. These include the cold and hot glues. These methods are very efficient, but they also come with their disadvantages as we are going to see later in this article.

How is Hot Glue used to Screw On Broadheads?


How is Hot Glue used to Screw On Broadheads?

Hot glues have been around for several decades, and arrow hunters have fallen in love with them due to their effectiveness and efficiency. Additionally, these glues are very efficient, so you can use them without having to worry about the budget.

One of the main reasons I strongly recommend hot glues is that they can be melted to retrieve a broadhead if you want to change the shaft. Therefore, you do not have to worry about removing the broadhead after screwing it using hot glue.

Nonetheless, it is crucial to be aware that you have to heat the broadhead if you want to retrieve it. Heating it can reduce its temper is the heating process is not done professionally. If you want to remove a broadhead that has been fixed with hot glue, use only low heat sources to avoid damaging the tip. If the broadhead does not have any ceramic coating, heat it carefully because the heat can damage the finishing standards of the heads.

  • We also recommend that you should never use a torch to heat the broadhead. You are just spelling trouble if you will use such kind of heating method.
  • Instead, just use an alcohol burner. It can give the sufficient heat that you need to melt the glue. Moreover, it can guarantee you that the composition of your broadhead won't be affected.

Cold Glue

broadhead

Cold glues have just hit the market the other day; they have not been existing in the market for so long, and for this reason, not many hunters have heard about them. Despite these being new entries in the glue market, they are very efficient when it comes to screwing on broadheads. They easily dissolve and are equally sticky. Hunters mix them with super glue to make very strong and tight adhesions.

The main difference between this type of glue and hot glues is that they do not require to be heated when fixing the broadhead. This is the best way to screw on your broadheads if you hunt bigger animals like deer and elk. The glue is strong enough to withstand any kind of impact.

Cold glues might make very stable adhesions, but they still have disadvantages. Many of my hunting boys have questioned it quality due to its susceptibility to becoming brittle once cured

Special types of chemicals may also be required to retrieve the broadhead. This makes the process of removing broadheads from the shaft expensive when compared to hot glues.

How Do You Screw on Your Broadhead Using This Method?


Many novice hunters wonder whether they have the skills to screw on broadheads themselves. My answer to this is yes as long as you follow the right guideline. If you don’t fix your broadheads in the right way, it could affect the degree of your accuracy when times to bring down that duck or goose comes, so pay attention if you don’t want frustrations.

Preparation

Like anything else that needs to be glued, you have to inspect where contact will be made. Clean them using a sandpaper and wipe them off to get rid of the dirt. This step is crcial since it will determine the strength of the adhesion made. Any oil residues must also be gotten rid. This can easily be achieved by using alcohol-based detergents.

  • N.B.: even if the broadhead arrow is new, it must be cleaned

Gluing

If you decide to use hot glue, ensure that your source of heat can be controlled. On the other hand, if you choose cold glues, ensure that you have the necessary chemicals with you to make the process smooth.

Despite the type of glue you decide to use, ensure that you have worn the necessary protection gears, glues can be lethal especially if they get into your eyes. They could even result in very serious burns.

Aligning

Once the broadhead is glued on the shaft, it is time to ensure that it is well aligned. If you fail to align the arrowhead correctly, you may never hit your targets on the fields, and nothing can be as disappointing as this. A crooked Arrowhead will not fly in the right direction. So, how do you align the broadhead?

The easiest way to align an arrow head is by spinning it before during and after the gluing process to ensure that it is well aligned. 

  • This method is easy and cheap but may not always produce true results.
  • Alternatively, you can buy a commercial aligner. Mechanized aligners are very reliable because they will always produce very satisfactory results.

Conclusion

________________________________________

Learning what should be used to screw on broadheads is essential to make sure that it won't come off from the arrow. Moreover, it also helps in the proper alignment, so the arrow's flight is correct and steady

Knowing what should be used to screw on broadheads is the first step to becoming an accomplished hunter. It is the foolproof way to ensure that your arrow head will not come off before it hits your target.

Additionally, it gives you the chance to align your arrow heads to ensure that they will fly in the right direction once released from the bow. I have also talked about the best ways to screw on broadheads; it is upon you to decide whether you will use hot or cold glue.

Alex Ramsey

Work hard & live to hunt! Countryman Hunter , Archery, shooter, Freelance outdoor writer and Love USA. founder of thebigdeer.com where I share my hunt experiences with all. showcase real gear & real reviews to help you become more prepared. Knowledge will save you, but great gear will help! Let Get Out & Go Hunting

Click Here to Leave a Comment Below

Leave a Reply: